Piling Rig Parts & Servicing

Call Us On

Advanced Mini Piling systems Ltd.

New, rebuilt & refurbished piling rigs

Piling rig parts and servicing offered by Advanced Mini Piling Systems. At our engineering and maintenance facility, we design and manufacture all our components. We also have CAD and CNC capabilities, with a clean room for hydraulics and a department for electronics and programming.

We manufacture new automatic piling rigs, but will also take on rebuilds and refurbishments of other piling equipment, as seen in the photos to the left.

Previous slide
Next slide

D1000 Bottom Rollers Set of 10:

  • Price £1980.00 exc VAT
  • Diameter of roller – 140.00mm
  • Length of shaft – 125.00mm
  • Bearing type – SKF 6205-2RSH
  • Oil seal – R23
  • Material: Roller/shaft – 230M07/817M40T
  • Mounting Bolts – M12X1.75 25.00MM
Previous slide
Next slide

Pullmaster PL5 Winch Service Kit:

  • Price £600.00 exc VAT
  • Winch Model—Pullmaster PL5 Free-fall
  • O-Ring/Oil Seal Material – Viton/Nitrile

Pullmaster PL5 Free-fall Winch Service Kit. This is a full-service kit we use on our winches, with everything contained. You cannot buy the full kit standard with sprag clutch, thrust bearing and SKF open ball bearings. We made our own and thought we would offer it to others. Although we only source the best products, we are not the manufacturer of the winch. Therefore, are not liable to any malfunctioning items or winch warranties.

Previous slide
Next slide

Piling Rig Track Alarm:

  • Price £960.00 exc VAT

Track Alarm for D1000 type Piling Rigs, or 1/2” BSP Directional Control Valve. Bolts onto existing 1/2” BSP ports of DCV, 3/8” BSP outlet to track motors. Valve sections must contain a motor spool for the system to work.

  • DCV Port Size—1/2” BSP
  • Outlet to Track Size—3/8” BSP
  • DCV Bank Centres—1.5″
  • Voltage—12v
  • Valve Body—Aluminium

    Kit Contents:

  • Valve block and pressure switches.
  • 12v alarm.
  • Relay.
  • Fuse holder.
  • Does not contain wires.
Previous slide
Next slide

Drop Hammer Piling Rig Weight/Hammer Ø30 mm Pin:

  • Price £67.15 exc VAT
  • Material 817M40 HT (EN24)
  • O/D—Ø30 mm
  • Cross Hole for Lynch Pin—Ø6 mm
  • Usable Length 93 mm
  • Head O/D Ø50 mm
  • Max SWL 1t

Drop hammer piling rig weight/hammer pin. Machined from a single piece on EN24. This newly designed pin has been designed and manufactured with safety in mind. The ball detent adds that extra level of security in preventing the pin from becoming dislodged if the lynch pin has been damaged while piling.

Comes with Ø6 mm lynch pin, Ø8 mm ball detent pre-installed and self colour. Supplied With Declaration of Incorporation.

Previous slide
Next slide

Drop hammer Piling Rig Replacement Pulley for 11 mm Wire Rope:

  • Price £200.92 exc VAT
  • O/D—140.00 mm
  • I/D—90.00 mm
  • Width—35.00 mm
  • Bearing Type—SKF 6210-2RS1
  • Wire Rope Ø—11.00 mm
  • Material—S355J2 Certification To EN10204:2004
  • Finish—Natural Treat With Rust Inhibitor

Important, made for 11 mm wire rope.

Piling Rig Replacement 11 mm Pulley for a D500 or D1000 type drop hammer rig. Comes with SKF bearing, internal circlip and pulley body. 

Previous slide
Next slide

RPR DH10.3 Sheave/Pulley for 11 mm Wire Rope:

Conforms to BS EN 16228-1:2014, BS ISO 16625:2013, BS ISO 2408:2017

  • Price £465.00 exc VAT
  • O/D—210.00 mm
  • I/D—90.00 mm
  • Width—35.00 mm
  • Bearing Type—SKF 6210-2RS1
  • Wire Rope Ø—11.00 mm
  • Material—S355J2 Certification To EN10204:2004
  • Finish—Natural Treat With Rust Inhibitor

Important, will not fit standard GP Services D500/D1000.

Optional replacement sheave/Pulley head available on request. Comes with SKF bearing, internal circlip and pulley body. 

get a quote

We are always happy to talk through our services in more detail so for more information please get in touch.

Get in Touch